» Metallurgical Special Valve » Cold Air Suction Valve
  • Cold Air Suction Valve

    Special suction valve with the help of negative pressure self-priming nipple embedded seal door open and closed valve body (valve plate) structure, working Angle of 0° ~ 90°, 0° closed, 90° fully open. 

    • Description

    Cold Air Suction Valve

    Introduction:

    With electric and manual two functions;

    Special suction valve with the help of negative pressure self-priming nipple embedded seal door open and closed valve body (valve plate) structure, working Angle of 0° ~ 90°, 0° closed, 90° fully open.

    The embedded sealing ring is made of high polymer silicone material. Air leakage rate ≤0.1% after suction valve is closed. Q235B, δ=12mm; The output shaft is made of 40Cr alloy.

    The opening requirement of the electric actuator is 0 ~ 90° Angle stroke, the operation mode is switch quantity adjustment (fully open and fully closed), and has 4-20mA output signal;

    The output torque of the electric actuator is increased by one stage on the basis of calculation, which is not less than 8kN·m. Worm gear worm gear mechanism requires the use of nodular cast iron worm gear and alloy steel worm material.

    Muffler block type muffler structure, muffler muffler volume ≥30dB(A), pressure loss ≤500Pa; The shell is made of Q235B, δ=6mm, and the hole plate of the silencing element is made of high quality cold rolled galvanized sheet, δ=1.5mm.

    Product Showing:

    Enquiry Form ( we will get back you as soon as possible )

    Name:
    *
    Email:
    *
    Message:

    Verification:
    2 + 6 = ?

    Maybe you like also

  • ABOUT US

    The company is committed to providing customers with a complete set of industrial valve solutions. Products are widely used in oil, natural gas, oil refining, chemical industry, power plants and other industrial fields with harsh working conditions and large demand around the world.

  • OUR PRODUCTS

    Marine Valve

    Natural Gas Special Valve

    Petrochemical Valve

    Power Station Valve

  • CONTACT US

    15-4, Building A, Longjing Rd, Yubei District, Chongqing 401122, China.

    Tel: +86-23-67956606 or +86-23-67304326

    Email: manager@hiseamarine.com

    Web: www.hiseavalve.com