Electric Gate Valve
Introduction:
The electric valve is to use an electric actuator to control the valve, so as to realize the opening and closing of the valve. It can be divided into upper and lower parts, the upper part is the electric actuator, and the lower part is the valve. The action distance is larger than that of the electric valve. The switching speed of the electric gate valve can be adjusted. Complicated than electric valves.
Electric gate valves are sensitive in response, safe and reliable, and many factories with high control requirements set up compressed air stations for pneumatic instrument control components. Electric is a device that requires electricity and can control its flow.
Features:
1. The valve adopts pressure self-tightening seal or valve body and bonnet gasket seal structure.
2. The electric device is equipped with a torque control mechanism, an on-site operation mechanism and a manual and electric switching mechanism. In addition to local operation, it can also perform remote operation, PLC control, 4~20mA current input and output intelligent control, etc.
3. The valve can be installed anywhere in the pipeline, and carbon steel or alloy steel valves can be selected according to the medium and the temperature of the medium.
4. When installing and debugging for the first time, the valve must be manually opened to about half of the position, so as to avoid damage to the valve or electrical equipment caused by reverse connection of the motor phase sequence.
Product Showing:
