Electric Stainless Steel Wafer Butterfly Valve
Introduction:
The electric stainless steel wafer butterfly valve relies on the power drive of the electric actuator to control the switch of the valve. The electric wafer butterfly valve itself has no flange, and the thickness of the valve body is relatively thin. A group of bolts are directly passed through the bolt holes. The butterfly valve is clamped between the flanges at both ends of the pipeline, and then connected with bolts, so it is especially suitable for working conditions where the site space is limited and the pipeline distance is relatively short.
Features:
The electric wafer butterfly valve is divided into hard seal and soft seal according to different sealing materials. The soft seal butterfly valve is a centerline type, which is generally used in places where the temperature and pressure are not very high or with corrosive media. It has the advantages of anti-corrosion and zero leakage.
Main Parameters:
| Nominal Diameter |
DN50～DN1200(mm) |
| Nominal Pressure |
PN0.6, 1.0, 1.6, 2.5MPa |
| Connection Form |
Wafer Type Connection |
| Body Material |
Stainless Steel |
| Seal Material |
Soft Seal (Rubber, PTFE, PPL), Hard Seal (Stainless Steel) |
| Power Supply Voltage |
AC220V, AC380V, DC24 |
| Applicable Medium |
Water, Steam, Oil, Corrosive Medium, etc. |
Product Showing:
