Fire Hydrant Sealing Gate Valve
Introduction:
The indoor fire hydrant is installed in the fire cabinet at the obvious position of the building, and is used together with the hose and water gun. In case of fire, quickly connect the water hose
Connect the other end of the fire hydrant with a water gun, and then unscrew the fire hydrant to put out the fire.
During the engineering installation of this product, the tightening force shall act on the outer hexagonal part of the lower part of the valve body. The tightening force shall not be applied on the hexagonal part of the valve cover to avoid product damage due to improper installation.
Maintenance:
1. Before installation, the valve must be unscrewed to prevent damage caused by the chaff rubber pad stuck on the valve seat, and placed in a clean place.
2. After installation, the garbage and impurities in the water channel must be cleared. When the valve is closed, the rubber pad must not be stuck with sediment, white paint or other impurities.
3. After the installation of the fire hydrant, the valve shall be opened regularly (generally half a month) to prevent the rubber pad from sticking to the valve seat and being damaged.
4. Always check whether the rubber pad is aged and damaged. In case of damage or water leakage, replace it in time.
5. If the user of this product finds any manufacturing quality problem during use, please contact our company while maintaining the original appearance of the product.
Product Showing:
