Manual Stainless Steel Threaded Ball Valve
Introduction:
Manual threaded ball valves are divided into integral (one-piece), two-stage and three-stage. The valve body casting adopts advanced technology, with reasonable structure and beautiful appearance. The valve seat adopts an elastic sealing structure, which is reliable in sealing and easy to open and close. The valve stem adopts a bottom-mounted structure with an inverted seal. When the valve cavity is abnormally boosted, the valve stem will not be flushed out. Two-piece and three-piece ball valves are also connected in the form of butt welding (BW) socket welding (SW), and can be equipped with international standard ISO bracket platforms and locking devices. A 90° switch positioning mechanism can be set, and it can be locked as needed to prevent misoperation. Drive mode: manual, electric, pneumatic.
Features:
(1) Small fluid resistance, full diameter ball valve basically no flow resistance.
(2) Simple structure, small volume, light weight.
(3) Close and reliable. It has two sealing faces, and the sealing face of the ball valve is widely used in various plastics, good sealing, can achieve complete sealing. It has also been widely used in vacuum systems.
(4) Easy to operate, open and close quickly, from fully open to fully closed as long as the rotation of 90°, easy to remote control.
Product Showing:
